Digital Video Interface (Dvi) – Simplified For the Rest of Us
A camel is a horse designed by a committee. It can be argued the same for the Dvi thorough as developed by Digital Display Working Group (Ddwg) in 1999. This thorough was developed as a change for a long-standing Vga standard.
There are a total of Six separate types of Dvi Connectors:
Hdtv
1 – Dvi-A
2 – Dvi-D particular Link
3 – Dvi-D Dual Link
4 – Dvi-I particular Link
5 – Dvi – I Dual Link
6 – M1-Da Integrated D, A and Usb.
Before we get any further, in the above, A stands for analog, D stands for Digital and I stands for Integrated. Unfortunately, many of these connectors are not compatible with each other. Hence, it is prominent to only derive Dvi cables after confirming the type that will be compatible with your system. Also, unlike Hdmi, Dvi cables carry no audio signal.
The maximum resolution that can be displayed depends on the Refresh rate (written with the “Hz”) and the display gadget mode being used e.g. Hdtv, Sxga and Wquxga etc. The discrepancy in the middle of particular Link and Dual link is that Dual Link displays 2 pixels per cycle clock as opposed to 1 pixel per cycle clock. Hence with Dvi-Dual Link, you get two times the facts per cycle for each pixel, resulting in higher capability display.
In order to get the right cable the first time, one must check the female Dvi connectors at the source and the display to form what signals they are compatible with. Below we show which cables are compatible for a given connectors:
1 – Dvi-A Cable à if one or both connectors are Dvi-A
2 – Dvi-D Cable à if one or both connectors are Dvi-D
3 – Dvi to Vga Cable à if one connector is Dvi-A, while the other is Vga (15 pin Computer Monitor connector)
4 – Dvi-I to Dvi-I Cable à If both connectors are Dvi-I. Although, any Dvi cable will work, Dvi-I cable is preferred.
5 – If one of the two connectors is Analog, than a direct cable cannot be used for connecting the source to the display. A converter box must be used to change the digital signal to analog for display. However, keep in mind that due to Digital ownership supervision (Drm), it is currently Not legal to make or sell converters for Digital Dvi or Hdmi signal to Analog signal (Vga or Component), at least in the United States.
Dvi thorough was developed as a change for the Vga standard, hence it was primarily designed for the computers that are rarely away from the source. However, as a home theater video display standard, users often have to run longer lengths of wire. Consequently, most Dvi cables will sustain a strong signal for up to 4.5m for higher resolutions, any way as this length increases the maximum supportable resolution drops. Users have reported using up to 10m long Dvi cables without noticeable signal loss. Dvi boosters may be important for longer cable runs. Occasionally, safe bet situations may wish a practice cable manufacturer for practice length and connector based cables.
Digital Video Interface (Dvi) – Simplified For the Rest of Us
Tags : Laser Range Finder
Did you enjoy this post? Why not leave a comment below and continue the conversation, or subscribe to my feed and get articles like this delivered automatically to your feed reader.
Comments
No comments yet.
Leave a comment